DMXMixerView

DMX Mixer

menu: (

DMX Light) -> ( ../images/Menu/Menu_DMXMixer.png

DMX Mixer)

Mixer Panels
Mixer controls
Grouping of controllers

Operation of the controllers

The operation of the controllers corresponds to the operation at other points in the program, so it is explained in an extra help - see Operation of control elements

Mixer Panels

A separate DMX mixer can be assembled. Multiple mixer panels can be created, which can then be equipped with DMX controllers.

The mixer panels are managed on the left side.

	Adds a new panel
	deletes the selected panel
	Moves the selected panel up one position
	Moves the selected panel one position down
	Increases the height of the mixer panels
	Decreases the height of the mixer panels

If one of the panels is selected in the list, this is selected and centered in the middle window section. After double-clicking on a panel name, it can be edited.

The mixing panel panels are displayed in the middle window area.
A mixer panel can be selected either from the list in the left part of the window or by clicking on the panel name. A selected panel is displayed with a blue border.

Mixer controls

Each panel can be equipped with different DMX controllers, which in turn can be assigned to lamp channels - see Controls Settings.
DMXControl_SettingButton

Channel assignment
The DMX controllers have a button ( '...') in the lower part, if this is pressed, a window opens in which the characteristics of the controller and the lamp / channel assignment can be set.
see Controls Settings

Selection of a control
A DMX controller can be selected by clicking on the name of the controller. A selected controller is displayed with a blue frame.

DMXControlEdit

In the right part of the window, DMX contols can be added or deleted to the selected panel.
The list shows the different controller types and can be selected.

	Adds a new DMX control to the selected mixer panel.
	Deletes the selected DMX control from the panel
	Imports all DMX controllers from a lamp definition with all properties, but without channel assignment. This is handy if you want to control the lamp channels of a specific lamp type, the entire label values are already set for this controller. A file selection window opens to determine the lamp definition.
	Moves the selected control one position to the left in the panal
	Moves the selected slider one position to the right in the panel

Grouping of controllers

To be able to move several controllers together, a common group exists for all controllers. Double-clicking on a knob will add the slider to the group.
Regulators that were added to the group get a red border. If a controller is changed, all controllers of the group will change as well.

Fader_KlickPos

-->

To remove a controller from the group, double-click on the controller again. With a three-click on a controller, all controllers are removed from the group!

Mouse-Clicks
2 x	control is added to the group or removed when it is already in the group
3 x	All controls are removed from the group - the group is then empty.